Water purification information

Work flow and work requirements of softened water equipment

Views : 85968
Update time : 2021-09-26 11:53:54
(1) Work flow of softened water equipment
Work (sometimes called water production, the same below), backwashing, salt absorption (regeneration), slow flushing (replacement), and fast flushing. All the processes of different softened water equipment are very similar, but due to the actual process or the need for control, there may be some additional processes. Any water softening equipment based on sodium ion exchange is developed on the basis of these five processes (among which, fully automatic water softening equipment will increase the brine reinjection process).

Backwashing: After working for a period of time, the equipment will intercept a lot of dirt brought by the raw water on the top of the resin. After the dirt is removed, the ion exchange resin can be completely exposed and the regeneration effect can be guaranteed. The backwashing process is that water washes in from the bottom of the resin and flows out from the top, so that the dirt intercepted by the top can be washed away. This process generally takes about 5-15 minutes. Salt absorption (regeneration): the process of injecting salt water into the resin tank. The traditional equipment uses a salt pump to inject the salt water, and the fully automatic equipment uses a dedicated built-in ejector to suck the salt water (as long as the inlet water has a certain pressure) . In the actual working process, the regeneration effect of salt water flowing through the resin at a slower speed is better than that of simply soaking the resin with salt water. Therefore, the softened water equipment is regenerated by the method of slowly flowing salt water through the resin. This process generally requires 30 About minutes, the actual time is affected by the amount of salt used. Slow flushing (replacement): After the salt water flows through the resin, the process of slowly flushing all the salt in the resin with raw water at the same flow rate is called slow flushing, because there are still a large number of functional groups in the flushing process. Calcium and magnesium ions are exchanged by sodium ions. According to actual experience, this process is the main process of regeneration, so many people call this process replacement. This process is generally the same as the salt absorption time, which is about 30 minutes. Quick flushing: In order to thoroughly flush the remaining salt, the resin should be flushed with raw water at a flow rate close to the actual work. The final effluent of this process should be soft water that meets the standard. Under normal circumstances, the fast flushing process is 5-15 minutes.
 

(2) Technical indicators and work requirements of softened water equipment:

Inlet water pressure: 0.18-0.6Mpa

Working temperature: 1-55℃ Source water hardness: <8mmol/L

Operation mode: automatic/manual water hardness: ≤0.03mmol/L

Regeneration agent: NaCL Regeneration method: downstream/countercurrent

Exchanger: 001*7 strong acid ion exchange resin

Control method: time/flow power supply: 220V/50Hz
Related News
Read More >>
PP Filter Cartridge Selection and Replacement Precautions PP Filter Cartridge Selection and Replacement Precautions
Oct .24.2024
Most of the household water purifier or water purifier are used in the first level of the filter are PP filter, the first level of the filter will not only directly affect the water quality, will also affect the back of the three or four filtration effect and the life of the filter, so the quality of the PP filter for the water purifier is particularly important.
Do you know the types of PP filter element commonly used in water filtration and the filter effect of the filter element? Do you know the types of PP filter element commonly used in water filtration and the filter effect of the filter element?
Oct .24.2024
PP cartridge can remove a small amount of solid particles in the liquid or air can protect the normal operation of the equipment or clean air, when the fluid enters the cartridge with a certain specification of the filter, the impurities are blocked, and the clean flow through the cartridge outflow, the cartridge is mainly used for filtration.
Do water purifiers actually work? Does it work? Does it work? Do water purifiers actually work? Does it work? Does it work?
Oct .23.2024
Is a water purifier actually useful? Is it useful? Is it useful? Let me tell you, useful to burst!
Professionals also say that in our current drinking water environment, water purifier is a little hero:
Characteristics of Reverse Osmosis Membrane Heavy Contamination and Offline Cleaning? Characteristics of Reverse Osmosis Membrane Heavy Contamination and Offline Cleaning?
Oct .23.2024
Reverse osmosis system design will have a certain degree of surplus, to ensure that in the emergency time is not because of the reverse osmosis system of water production or desalination rate drop, reverse osmosis system differential pressure rise and make the water supply is not enough to cause a threat to the safety of the production, but in fact it is also because of the existence of these surplus makes the hidden faults are sometimes not able to show in time, so that ultimately may be evolved into reverse osmosis membrane Heavy contamination of reverse osmosis membrane elements.